Karen LeGault ~Fine Art Blog

August 1, 2015

What is Rice Paper?

Filed under: Uncategorized — by Karen LeGault @ 10:33
Tags: , , ,
What is Rice Paper?
When you hear the words “rice paper” does your mind conjure up something to wrap around a tasty spring roll?
It took me a while to figure out that when I mention to art festival viewers that “many of my paintings are on rice paper”, that they really were not sure what I was talking about. How could something made of “rice” be archival?

Of course this kind of “rice” paper is not made of rice.

What I can tell you is that high quality “rice paper” is a joy to paint on.

There are different thicknesses of paper, single, double and approximately one and a half weight. Some papers are very absorbent. Some are absorbent and very hard to retain clean edges in a brush stroke. Some are absorbent and much easier to keep that clean edge. The surface of a high quality paper is smooth but not slick like some of the machine made papers. Lesser papers somewhat rough.

Some are sized to make the surface less absorbent and more repellent, the ink and color almost sit on top of the paper when applied. Traditionally these are used for landscapes where color is, typically, not so important, but drawing with the brush on the surface is.
A thin paper is beautiful for single strokes in black ink, but more difficult to build up color on.
A thicker paper can sustain many applications of ink, color and washes.

Here is the description I found on Wikipedia of how it is made:

This “Rice paper”, smooth, thin, crackly, and strong, is named as a wrapper for rice, and is made from bark fibres of the paper mulberry tree. It is used for origami, calligraphy, paper screens and clothing. It is stronger than commercially made wood-pulp paper. Less commonly, the paper is made from rice straw.

Depending on the type of mulberry used, it is named kozo (Broussonetia papyrifera, the paper mulberry), gampi (Wikstroemia diplomorpha), or mitsumata (Edgeworthia chrysantha). The fiber comes from the bark of the paper mulberry, not the inner wood or pith, and traditionally the paper is made by hand.

The branches of the paper mulberry shrubs are harvested in the autumn, so the fibre can be processed and the paper formed during the cold winter months, because the fibre spoils easily in the heat. The branches are cut into sections two to three feet long and steamed in a large kettle, which makes the bark shrink back from the inner wood, allowing it to be pulled off like a banana peel. The bark can then be dried and stored, or used immediately. There are three layers to the bark at this stage: black bark, the outermost layer; green bark, the middle layer; and white bark, the innermost layer. All three can be made into paper, but the finest paper is made of white bark only.

If the bark strips have been dried, they are soaked in water overnight before being processed further. To clean the black and green bark from the white bark, the bark strip is spread on a board and scraped with a flat knife. Any knots or tough spots in the fibre are cut out and discarded at this stage.

The scraped bark strips are then cooked for two or three hours in a mixture of water and soda ash. The fibre is cooked enough when it can easily be pulled apart lengthwise. The strips are then rinsed several times in clean water to rinse off the soda ash. Rinsing also makes the fibre brighter and whiter-fine kozo paper is not bleached, it is naturally pure white.

Each bark strip is then inspected by hand, against a white background or lit from behind by a light-box. Any tiny pieces of black bark and other debris are removed with tweezers, and any knots or tough patches of fibre missed during scraping are cut out of the strips. The ultimate goal is to have completely pure white bark.

The scraped, cooked, and cleaned strips are then laid out on a table and beaten by hand. The beating tool is a wooden bat that looks like a thicker version of a cricket bat. The fibres are beaten for about half an hour, or until all the fibres have been separated and no longer resemble strips of bark.

The prepared fibre can now be made into sheets of paper. A viscous substance called formation aid is added to the vat with the fibre and water. Formation aid is polyethylene oxide, and it helps slow the flow of water, which gives the paper-maker more time to form sheets. Sheets are formed with multiple thin layers of fibre, one on top of another.

Blog at WordPress.com.